Skip to content

DYNEEMA BELL ROPES

All prices on this page are shown in GBP (£) and do not include VAT. For details about carriage and VAT, please see our Invoicing page under "Placing an Order" in the menu. Prices are current as of 1st September 2026.

What is included with a Dyneema bell rope?

This type of bell rope features a Dyneema top end which is machine spliced to the sally and tail end approximately 18 inches above the sally. The rest of the rope downwards is flax.
 
Dyneema bell ropes have a standard 3 feet long sally made from a combination of 3 colours. Longer sallies can be manufactured at a cost of £18.00 + vat per additional 6 inches. For more information about sallies and to view photographs of the colours we offer, please visit our Sallies page. All sallies are finished to a standard 1⅞ inch diameter.
 
Below the sally is a flax tail end that will be manufactured to a suitable length and diameter based on the diameter of your wheel and the weight of your bell. Lighter bells usually have shorter tail ends, while heavier bells require longer tail ends.
 
Every bell rope is made to order, so you can customise the sally and tail end lengths to suit your church's specific requirements.

How do I measure my overall length?

The overall length of a bell rope is the complete physical length of the rope from one end to the other end. We recommend two ways of finding out your overall length:
1. Measuring from one physical end of the rope to the other physical end of the rope while there are no tuckbacks or loops present in the rope.
2. Measuring from the ringing chamber floor to the garter hole in the wheel of your tenor bell, and adding 15 feet.
 
These methods of measurement assume that all of your bells are on the same level. If you have multiple levels of bells, we will require an overall length measurement for each level.

Dyneema topped bell rope prices

We ask that customers requiring a quotation for Dyneema topped bell ropes reach out to us via email or phone.
 
Our email address is: ellispritchardropes@gmail.com
Our phone number is: 01509 852178

Pre-stretched polyester vs Dyneema

Pre-stretched polyester is more durable than flax, making it a great choice in general. However, for taller towers where a longer length of rope is required and some springiness may develop in the pre-stretched polyester, Dyneema is recommended instead.
 
Pre-stretched polyester has a 3 strand makeup, while Dyneema is a braid-on-braid design. Dyneema ropes have a protective outer layer to shield the inner core.

What is a machine splice?

A machine splice is a splice made via machine. This type of splice results in a small increase in diameter at the join. This is different from a hand splice, which gives a larger increase in diameter and results in a bulkier splice. Our machine splices are done at a standard 18 inches above the sally on Dyneema topped bell ropes.