NEW TAIL ENDS
All prices on this page are shown in GBP (£) and do not include VAT. For details about carriage and VAT, please see our Invoicing page under "Placing an Order" in the menu. Prices are current as of 1st September 2026.
Machine spliced new tail end repairs
This type of repair features a new flax tail end which is machine spliced to the bottom end of the sally. A machine spliced tail end repair is available for flax, pre-stretched polyester topped, and Dyneema topped bell ropes.
In order to perform a machine spliced tail end repair, we will need around 6 inches of good quality rope below the sally to splice onto. If there is not enough good quality rope below the sally, we may have to remove several inches of your sally and use the good quality rope inside the sally to perform the repair instead.
Tail ends are typically manufactured to a suitable length and diameter based on the diameter of your wheel and the weight of your bell. Lighter bells usually have shorter tail ends, while heavier bells require longer tail ends. Alternatively, we can measure the existing tail end on the rope that is due for repair, and manufacture the new tail end to match.
The cost of a machine spliced new tail end is £55.00 + vat per rope.
If your tail end is made from a non standard material, a surcharge of £10.00 + vat will apply. We will always inform the customer in advance if this charge applies to their new tail end repair.
We ask that all bell ropes intended for this work are shipped/dropped off to our works at Ellis Ropes Ltd, The Rope Works, Bars Hill, Costock, Loughborough, Leicestershire, LE12 6XY. Please include a covering letter inside the parcel with your name, contact information, the church that the ropes have come from, and details of the repairs you'd like performing.
What is a machine splice?
A machine splice is a splice made via machine. This type of splice results in a small increase in diameter at the join. This is different from a hand splice, which gives a larger increase in diameter and results in a bulkier splice. Our machine splices for new tail end repairs are done at the base of the sally.
Individual tail ends prepped for hand splicing
Individual tail ends are separate flax tail ends which are prepared for hand splicing, to be shipped directly to the customer. One end is crowned, and the other end is taped approximately 6 inches from the end of the rope. The 3 strands of rope are opened and securely taped, ready for hand splicing on to your existing rope.
Tail ends are typically manufactured to a suitable length and diameter based on the diameter of your wheel and the weight of your bell. Lighter bells usually have shorter tail ends, while heavier bells require longer tail ends. Every rope is made to order, so you can customise the tail end lengths to suit your church's specific requirements.
The cost of a size one (<15cwt) individual tail end is £25.00 + vat
The cost of a size two (>15cwt) individual tail end is £28.00 + vat
